How to Make an Apple Bong in Easy Steps

If you are looking for a simple and cheap way to enjoy your herb or tobacco, you might want to try making an apple bong. An apple bong is a homemade pipe that uses an apple as the main component. Apples are easy to find, inexpensive, and biodegradable. They also add a sweet flavor to your smoke and can be eaten after use.

An apple bong works by creating a chamber inside the apple that connects a bowl, a mouthpiece, and a carb hole. The bowl is where you place your herb or tobacco, the mouthpiece is where you inhale the smoke, and the carb hole is where you control the airflow. By lighting the bowl and covering the carb hole, you create a vacuum that draws the smoke into the apple chamber. By releasing the carb hole, you allow fresh air to enter and push the smoke out of the mouthpiece.

There are different ways to make an apple bong, but they all require some basic tools and materials. Here are two methods that you can follow to make your own apple bong at home.

Method 1: Making an Apple Bong Using a Pen

This method is quick and easy, and only requires an apple and a pen. You can use any type of pen, as long as it has a sharp tip and a hollow body. Here are the steps to follow:

  1. Get an apple and a pen. Make sure the apple is fresh and firm, and the pen is clean and empty. You can remove the ink well from the pen by unscrewing the tip and pulling it out.
  2. Remove the stem from the apple. You can use your fingers to twist or pull it off, or cut a slit around it with a knife. Make sure you get the entire stem out, as it will interfere with the airflow.
  3. Bore a hole through the top of the apple. Place the pointed tip of the pen over the hole where the stem used to be, and push it into the apple at a slight angle. Stop when you reach about halfway through the apple. This hole will serve as the bowl for your herb or tobacco.
  4. Bore a second hole near the bottom of the apple. It should be about half an inch from the base of the apple. Insert the pen and poke a hole that meets up with the first hole you made. This hole will serve as the mouthpiece for your apple bong.
  5. Bore a third hole on the side of the apple. It should be about an inch or more from the top hole, depending on how big your apple is. Push the pen into the apple until it connects with the chamber system you have created. This hole will serve as the carb for your apple bong, so make sure it is in a convenient place to cover with your finger while smoking.
  6. Make a bowl. Use the pen or another object to carve out a hollow shape on top of the apple where you made the first hole. You can make it as deep or shallow as you want, depending on how much herb or tobacco you want to smoke. Be careful not to poke through the bottom of the bowl, or your material will fall into the chamber.

Congratulations, you have made an apple bong using a pen! To use it, simply pack some herb or tobacco into the bowl, cover the carb hole with your finger, light up, and inhale through the mouthpiece. When you want to clear the smoke, release your finger from the carb hole and enjoy.

Method 2: Making a Hollowed-Out Apple Bong

This method is slightly more complicated, but it allows you to make a bigger chamber and bowl for your apple bong. You will need an apple, a knife, a spoon, and a hollow pen or straw. Here are the steps to follow:

  1. Get an apple, a knife, a spoon, and a hollow pen or straw. Make sure they are all clean and ready to use.
  2. Cut off the top of the apple. About an inch from the top of
    the apple, cut around it with a sharp knife. Slide off
    the top and remove
    the stem.
    Do not cut too close
    to
    the stem because
    you will need
    to use
    the top
    as
    a bowl.
  3. Hollow out
    the apple.
    Use
    a spoon
    to scoop out
    the flesh
    of
    the apple,
    leaving
    a thin wall around
    it.
    Be careful not
    to puncture
    the wall,
    or your bong will leak.
    You can eat
    the apple flesh
    or save
    it for later.
  4. Poke a hole through the side of the apple. Use the hollow pen or straw to poke a hole through the wall of the apple, near the bottom. This hole will serve as the mouthpiece for your apple bong.
  5. Poke another hole through the side of the apple. Use the hollow pen or straw to poke another hole through the wall of the apple, near the top. This hole will serve as the carb for your apple bong. Make sure it is in a convenient place to cover with your finger while smoking.
  6. Attach the top of the apple to the bottom. Use the knife to carve out a hole on the bottom of the top part of the apple, where you removed the stem. This hole should fit snugly over the top of the bottom part of the apple, creating a seal. You can use some toothpicks or skewers to secure it in place if needed.
  7. Make a bowl. Use the knife or spoon to carve out a hollow shape on top of the apple where you removed the stem. You can make it as deep or shallow as you want, depending on how much herb or tobacco you want to smoke. Be careful not to poke through the bottom of the bowl, or your material will fall into the chamber.

Congratulations, you have made a hollowed-out apple bong! To use it, simply pack some herb or tobacco into the bowl, cover the carb hole with your finger, light up, and inhale through the mouthpiece. When you want to clear the smoke, release your finger from the carb hole and enjoy.

Conclusion

An apple bong is a fun and easy way to smoke your herb or tobacco without spending a lot of money or time