How to Make an Apple Bong in Easy Steps

Here is a possible blog post about how to make an apple bong:

If you are looking for a simple and fun way to enjoy your herb or tobacco, you might want to try making an apple bong. An apple bong is a homemade pipe that uses an apple as the main component. Apples are easy to find, cheap, and biodegradable, making them ideal for a DIY project. Plus, they add a fruity flavor to your smoke, which can enhance your experience.

There are two main methods to make an apple bong: using a pen or using a knife and a spoon. Both methods require only a few minutes and some basic tools. Here is how to do it:

Method 1: Using a Pen

This method is quick and simple, and it only requires an apple and a pen. You can use any type of pen, as long as it has a sharp tip and a hollow body. Here are the steps:

  1. Get an apple and a pen. Make sure the apple is fresh and firm, and the pen is clean and empty of ink. You can remove the ink well by unscrewing the tip of the pen and taking it out.
  2. Remove the stem from the apple. You can use your fingers to twist or pull it off, or cut it with a knife. Make sure you get the entire stem out, as it will interfere with the airflow.
  3. Bore a hole through the top of the apple. Place the pointed tip of the pen over the hole where the stem used to be, and push it into the apple at a slight angle. Stop when you reach about halfway through the apple. This hole will serve as the bowl for your herb or tobacco.
  4. Bore a second hole near the bottom of the apple. It should be about half an inch from the base of the apple. Insert the pen and poke a hole that meets up with the first hole you made. This hole will serve as the mouthpiece for your apple bong.
  5. Bore a third hole on the side of the apple. It should be about an inch or more from the top hole, and in a convenient place to cover with your finger while smoking. Insert the pen and poke a hole that connects with the chamber system you have created. This hole will serve as the carb, which allows you to control the airflow.
  6. Make a bowl. Use the pen or another object to carve out a hollow shape on the top of the apple where the first hole was drilled. Make sure it is deep enough to hold your herb or tobacco, but not too deep that it reaches the core of the apple.

Congratulations, you have made an apple bong using a pen! Now you can fill the bowl with your herb or tobacco, light it up, cover the carb with your finger, and inhale from the mouthpiece. When you are done, you can either eat or discard the apple.

Method 2: Using a Knife and a Spoon

This method is slightly more complex, but it allows you to make a larger bowl and use less of the apple’s flesh. You will need an apple, a knife, and a spoon for this method. Here are the steps:

  1. Get an apple, a knife, and a spoon. Make sure they are clean and sharp.
  2. Slice off the top of the apple. About an inch from the top of the apple, cut off the top using a knife. Slide it off and remove the stem. Do not cut too close to the stem, as you will need to use this piece as a lid for your bowl.
  3. Carve out a bowl with a spoon. Use a spoon to scoop out some of the flesh from inside the apple, leaving about half an inch of thickness around the edges. Be careful not to puncture or crack the skin of the apple, as this will cause leaks.
  4. Poke a carb hole and mouthpiece through the sides of
    the apple with a pen. Use a pen or another sharp object to poke two holes through
    the sides of the apple, one near
    the bottom for
    the mouthpiece,
    and one near
    the top for
    the carb.
    Make sure they connect with
    the hollow space inside
    the apple.
  5. Attach
    the lid
    to
    the bowl.
    Place
    the piece
    of
    apple
    you cut off earlier on top
    of
    the hollowed-out part,
    aligning
    it with
    the original shape.
    You may need
    to
    carve out a small notch
    on
    the lid
    to
    fit
    the carb hole.

You have made an apple bong using a knife and a spoon! Now you can fill the bowl with your herb or tobacco, light it up, cover the carb with your finger, and inhale from the mouthpiece. When you are done, you can either eat or discard the apple.

Conclusion

Making an apple bong is a fun and easy way to enjoy your herb or tobacco. It only takes a few minutes and some basic tools, and you can use any type of apple you like. Apples are also biodegradable and edible, so you don’t have to worry about wasting or cleaning them. Just remember to be careful when carving or poking holes in the apple, and enjoy your smoke!