If you are a fan of smoking herb or tobacco from a glass bong, you know how frustrating it can be when your precious piece gets damaged. Whether it’s a crack, a chip, or a clean break, you don’t want to throw away your bong just because of a minor flaw. Luckily, there are some ways to fix a broken glass bong and restore it to its former glory. In this blog post, we will show you some of the methods and products you can use to repair your glass bong at home.
Before we start, there are some things you need to consider:
- Not all damage is repairable. If your bong is shattered into many pieces, or if the hole is too big, you may not be able to fix it. In that case, you may want to invest in a new bong instead.
- Not all products are safe for human use. Some glues or sealants may contain toxic solvents that can harm your health when heated or inhaled. You should always look for non-toxic, food-grade, and heat-resistant products when repairing your bong.
- Not all repairs are permanent. Some methods may only work temporarily or may weaken over time. You should always check your bong for leaks or cracks before using it, and empty it between uses to prevent water damage.
With that said, let’s look at some of the options you have to fix your glass bong:
Food Grade Silicone
Food grade silicone is a non-toxic and waterproof substance that can be used as a sealant for minor cracks or chips in your glass bong. It can also be used to fill in gaps between joints or tubes. Food grade silicone is easy to apply and can create a tight seal that prevents leaks. However, it does not provide any structural support and can be easily peeled off or removed. Therefore, it is not suitable for large holes or breaks that need more stability.
To use food grade silicone to repair your glass bong, you will need:
- A tube of food grade silicone (you can find it online or in hardware stores)
- A pair of scissors or a knife
- Some alcohol and cotton pads
- A hairdryer (optional)
Follow these steps:
- Clean the area around the crack or chip with alcohol and cotton pads. Make sure there is no dirt, dust, or residue on the glass.
- Cut the tip of the silicone tube and squeeze out a small amount of silicone on the crack or chip. Use a toothpick or a small tool to spread it evenly and fill in any gaps.
- Let the silicone cure for at least 24 hours, or follow the instructions on the package. You can use a hairdryer to speed up the process if you want.
- Trim off any excess silicone with scissors or a knife.
- Check for any leaks by filling your bong with water and inspecting it carefully.
Two-Part Epoxy
Two-part epoxy is a strong adhesive that can bond glass together and create a durable repair. It is made by mixing two components: resin and hardener. There are many brands of two-part epoxy available on the market, but you should look for one that is non-toxic, food-grade, and heat-resistant. Two-part epoxy works best on clean breaks that can be aligned perfectly. It can also be used to fix hairline cracks or small chips.
To use two-part epoxy to repair your glass bong, you will need:
- A two-part epoxy kit (you can find it online or in hardware stores)
- A disposable container and a wooden stick
- Some alcohol and cotton pads
- A pair of gloves and safety glasses
- A clamp or tape (optional)
Follow these steps:
- Clean the broken edges of the glass with alcohol and cotton pads. Make sure there is no dirt, dust, or residue on the glass.
- Put on gloves and safety glasses to protect yourself from the epoxy.
- Mix the resin and hardener in the disposable container according to the instructions on the package. Use the wooden stick to stir well until they are fully blended.
- Apply a thin layer of epoxy on both sides of the break. Use the wooden stick to spread it evenly and avoid any bubbles.
- Press the broken pieces together and align them carefully. Hold them in place for a few minutes, or use a clamp or tape to secure them.
- Let the epoxy cure for at least 24 hours, or follow the instructions on the package.
- Remove the clamp or tape and trim off any excess epoxy with a knife.
- Check for any leaks by filling your bong with water and inspecting it carefully.
Loctite Glass
Loctite Glass is a special type of glue that is designed to bond glass to glass. It is different from super glue, which can damage glass or leave white marks. Loctite Glass is water-resistant and heat-resistant, and it does not contain any solvents that can be toxic to humans. Loctite Glass works well on small cracks or chips that do not affect the structural integrity of the bong. It can also be used to fix broken accessories like bowls or stems.
To use Loctite Glass to repair your glass bong, you will need:
- A tube of Loctite Glass (you can find it online or in hardware stores)
- Some alcohol and cotton pads
- A pair of gloves and safety glasses
Follow these steps:
- Clean the area around the crack or chip with alcohol and cotton pads. Make sure there is no dirt, dust, or residue on the glass.
- Put on gloves and safety glasses to protect yourself from the glue.
- Cut the tip of the Loctite Glass tube and squeeze out a small amount of glue on the crack or chip. Use a toothpick or a small tool to spread it evenly and fill in any gaps.
- Let the glue dry for at least 15 minutes, or follow the instructions on the package.
- Check for any leaks by filling your bong with water and inspecting it carefully.
Other Methods
Besides the methods we have mentioned above, there are some other products or techniques that you can try to fix your glass bong. However, these methods may not be as effective, safe, or long-lasting as the ones we have recommended. Use them at your own risk and discretion.
- JB Weld, Quick Steel, Plumber’s Putty: These are metal-based compounds that can harden and seal cracks or holes in metal pipes or other objects. They may work on glass bongs as well, but they are not designed for that purpose. They may also contain toxic chemicals that can leach into your water or vapor. Use them only as a last resort and avoid inhaling them.
- Duct Tape: This is a cheap and easy way to cover up a crack or hole in your glass bong. However, it is not waterproof or heat-resistant, and it can peel off easily. It also looks very unappealing and unprofessional. Use it only as a temporary solution until you can get a better repair product.
- Blow Torch: This is a method that requires glassblowing skills and equipment. It involves heating the crack or break with a blow torch and melting the glass together. This can create a seamless repair that restores the original shape and function of the bong. However, it is also very risky and difficult to do without proper training and tools. You may end up burning yourself or making the damage worse. Do not attempt this method unless you are an experienced glassblower or have access to one.
Conclusion
We hope this blog post has helped you learn how to repair a cracked or broken glass bong. As you can see, there are some methods and products that you can use to fix your bong at home, depending on the type and extent of the damage. However, you should always be careful and cautious when repairing your bong, as some products may be harmful to your health or ineffective in sealing leaks. You should also check your bong regularly for any signs of wear and tear, and replace it if necessary.
If you are looking for a new glass bong or other smoking accessories, you can check out our online store for some great deals and quality products. We have a wide range of bongs, pipes, vaporizers, grinders, rolling papers, and more. Whether you need a simple replacement or an upgrade, we have something for everyone. Shop now and enjoy free shipping on orders over $50!
