How to Make an Apple Bong in Easy Steps

Have you ever wanted to smoke your herb or tobacco in a natural and fruity way? If so, you might want to try making an apple bong. An apple bong is a homemade pipe that uses an apple as the main component. It is easy to make, cheap, and biodegradable. Plus, it adds a sweet flavor to your smoke.

In this blog post, we will show you how to make an apple bong in two different ways: using a pen or using a knife and a spoon. Both methods are simple and require only a few items that you probably have at home. So, grab an apple and get ready to enjoy a smooth and tasty hit.

How to Make an Apple Bong Using a Pen

This method is considered “pure” because all you need to make it is an apple and a stick-like device, such as a pen, with a tip sharp enough to poke a hole in the apple. Here are the steps to follow:

  1. Get an apple and a pen. Make sure the apple you use is fresh. A soft apple could collapse while you’re trying to bore the holes. It’s ideal to use the type of ball-point pen with a tip you can unscrew so you can take out the ink well. Otherwise, you may spill ink all over the apple. Once you take out the ink well, screw the tip back on. Don’t use a pencil. It’s likely to break inside the apple while you’re trying to make a hole with it.
  2. Remove the stem from the apple. You can use your fingers to twist or pull it off or cut a slit around the stem to remove it. Make sure you get the entire stem; if it breaks, dig into the hole with your fingers and remove it from the base.
  3. Bore a hole through the top of the apple. Place the pointed tip over the hole where the stem used to be and jam the pen into the apple at a slight angle. Push it into the apple until you’ve made a hole that extends about halfway through the apple. If the apple is difficult to push through, it may help to use a twisting motion as you push. Once you make the initial hole with the pen’s tip, you can remove the pen, unscrew the tip, and use the tip-less pen to push into the apple. The apple will slide into the hollow pen. When you’re finished making the hole, remove the pen and discard the apple piece.
  4. Bore a second hole near the bottom of the apple. It should be about half an inch from the hole at the apple’s base. Insert the pen and poke a hole that meets up with the first hole you poked.
  5. Bore a third hole on the side of the apple. Insert the pen into the apple an inch or a little more from the top hole. Push the pen into the apple until the third hole meets up with the chamber system you have created. This hole will serve as the carb, so it should be in a place that is convenient to cover with a finger while you’re lighting the pipe.
  6. Make a bowl. Use the pen or another object to carve out a hollow shape on the top of the apple where
    the first hole was drilled.

Congratulations! You have just made an apple bong using a pen. Now, all you need to do is pack some herb or tobacco into the bowl, cover the carb with your finger, light up, and inhale through
the bottom hole.

How to Make an Apple Bong Using a Knife and a Spoon

This method is slightly more complicated but it allows you to hollow out
the apple and turn it into a bong. You will need:

  • A knife
  • A spoon
  • An apple
  • A hollow pen
  • Herb or tobacco
  • A lighter

Here are
the steps to follow:

  1. About an inch from
    the top of
    the apple, cut
    the top using
    a sharp knife.
    Slide
    the top off and remove
    the stem.
    Do not cut too close from
    the stem because you will need
    to use
    the top like
    a bowl.
  2. Use
    a spoon
    to scoop out
    the flesh of
    the apple,
    leaving about half an inch of
    the wall intact. Be careful not
    to puncture
    the apple or make
    it too thin. You should end up with
    a hollow apple with
    a hole on
    the top.
  3. Use
    the pen
    to poke a hole on
    the side of
    the apple, near
    the bottom. This will be your mouthpiece.
  4. Use
    the pen
    to poke another hole on
    the opposite side of
    the apple, near
    the top. This will be your carb.
  5. Place
    the top of
    the apple back on and secure it with a toothpick or a skewer.

Voila! You have just made an apple bong using a knife and a spoon. Now, all you need to do is pack some herb or tobacco into the top of the apple, cover the carb with your finger, light up, and inhale through the mouthpiece.

Tips and Warnings

Here are some tips and warnings to keep in mind when making and using an apple bong:

  • Make sure to clean the pen before and after using it to avoid ink contamination.
  • Don’t make the holes too big or too small. They should be just wide enough to allow air flow and prevent clogging.
  • Don’t use an apple bong that has been sitting for too long. It may start to rot or grow mold, which can be harmful to your health.
  • Don’t eat the apple after using it as a bong. It may contain ash, resin, or bacteria that can make you sick.
  • Enjoy your apple bong responsibly and moderately. Don’t smoke more than you can handle and don’t drive or operate machinery while under the influence.

Conclusion

An apple bong is a fun and easy way to smoke your herb or tobacco in a natural and fruity way. It is cheap, biodegradable, and adds a sweet flavor to your smoke. You can make an apple bong using a pen or using a knife and a spoon. Both methods are simple and require only a few items that you probably have at home. Just follow the steps we have shown you and you will be able to enjoy a smooth and tasty hit in no time.

We hope you found this blog post helpful and informative. If you have any questions or comments, feel free to leave them below. And if you liked this post, please share it with your friends and fellow smokers. Happy smoking!