If you enjoy smoking herb or tobacco from a glass bong, you know how important it is to keep it clean and well-maintained. A dirty bong can ruin the flavor of your smoke, make your hits harsher, and expose you to harmful bacteria and mold. Not to mention, it looks unsightly and unappealing.
Fortunately, cleaning a glass bong is not a difficult task, and you can do it with some simple household items. In this blog post, we will show you how to prevent your glass bong from getting clogged or dirty with resin or ash, and how to clean it when it does.
How to Prevent Your Glass Bong from Getting Clogged or Dirty?
The best way to prevent your glass bong from getting clogged or dirty is to change the water after every smoke session. This will prevent the buildup of tar, resin, and ash in the water, which can make your bong smell bad and affect the quality of your smoke. You should also rinse your bong with hot water before and after each use, to remove any loose debris and residue.
Another tip is to use a screen or a filter in your bowl, to prevent ash and herb particles from falling into the bong. This will reduce the amount of cleaning you need to do later, and also improve the airflow and combustion of your herb or tobacco. You can find screens or filters at any head shop or online store that sells smoking accessories.
Finally, you should avoid overpacking your bowl, as this can cause your herb or tobacco to burn unevenly and produce more ash and resin. A good rule of thumb is to fill your bowl about halfway, and tamp it down lightly with your finger. This will ensure a smooth and even burn, and less waste.
How to Clean Your Glass Bong When It Gets Clogged or Dirty?
If you notice that your glass bong is clogged or dirty, you should clean it as soon as possible. A clogged or dirty bong can affect the performance and taste of your smoke, and also pose health risks. Here are some easy steps to clean your glass bong using common household items:
- Detach the smaller parts of your bong, such as the bowl, the slide, and the stem. Rinse them with hot water for 1-2 minutes, to loosen any stubborn debris and wash away any bits that aren’t especially stuck.
- Place the parts in a plastic bag or a container with isopropyl alcohol and coarse salt. The alcohol will help break down the tar and resin stuck to the parts, and the salt will act as an abrasive to scrub them away. Shake the bag or container gently for 2-3 minutes, then let it soak for 4-5 hours.
- Pour out the water from your bong, then fill it halfway with isopropyl alcohol and add 4 tbsp of coarse salt. Plug the holes of your bong with paper towels or rubber stoppers, then shake it over the sink for 4-5 minutes. Scrub the inside of your bong with a bong brush or a sponge, if needed.
- Pour out the alcohol/salt mixture from your bong and the bag/container with the parts. Rinse everything with warm water several times, until no alcohol or salt are left. Let everything air dry for about an hour, or until there is no smell of alcohol.
- Reassemble your bong and enjoy a fresh and clean smoke!
If you don’t have isopropyl alcohol or salt, you can also use other methods to clean your glass bong, such as:
- Lemon juice and boiling water: Boil some water and add lemon juice to it, then pour it into your bong. Let it soak for a few hours, then rinse with warm water.
- Vinegar and baking soda: Pour some vinegar into your bong, then add some baking soda. Wait for the fizzing reaction to subside, then shake your bong gently. Rinse with warm water.
- Commercial bong cleaners: You can buy specially made bong cleaners at any head shop or online store that sells smoking accessories. Follow the instructions on the label for best results.
Conclusion
Cleaning your glass bong regularly is essential for enjoying a smooth and flavorful smoke. By following these simple tips, you can prevent your glass bong from getting clogged or dirty with resin or ash, and keep it in good condition for a long time. Happy smoking!
Sources:
